What steps should be taken to repair asphalt?

15 Nov 2019 09:00

Back to list of posts


After a long time, we will find that there are always a lot of potholes in the asphalt lane. This will have certain hidden dangers. For this reason, we need to repair the problem to remove the corresponding troubles. Of course, the specific details of the operation are worthy of our consideration. Know clearly and then operate.

Asphalt repair:
1. Asphalt Mixing Company introduces measuring or estimating the amount of filler you are going to repair.

For a small pit, less than two feet, it can be repaired with about 50 pounds of cold asphalt filler.

Choose to repair asphalt packing, cold asphalt mixture, then 50 pounds of plastic bag cement, and a bucket of water.

2. Use a gardening shovel to shovel a clean loose soil and debris. There are other suitable tools. If it is dry soil, you may want to use a garden hose to pour it out because the tar will not dry.

3. If there is water, let the hole dry because its tar is not sticky to the soil.

If you are in a hurry, you can also use a fan that can fill holes more than three or four inches with compactable materials such as clay and gravel concrete.

4, fill the hole with asphalt filler, and at the same time about half an inch or more can be paved.

This will allow the patch-level pavement to be operated later, wrapped in hand-smashed, gas-plated slabs, and even a small hole hammer.

Make sure the cold asphalt mixture is pressed into the hole, and you may find that the patch will be exposed soon.

5, asphalt mixing company introduction If necessary, you need to cover the patch.

You can put a board or splint in place for a few days to make sure it hardens but it is optional, and if you take it tightly, it can move immediately.

Comments: 0

Add a New Comment

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License